MIL-G-47316A (MI)
any of the inspections set forth in the specification where such inspections are deemed
necessary to ensure supplies and services conform to prescribed requirements.
4.1.1 Responsibility for compliance. All items shall meet all requirements of
sections 3 and 5. The inspection set forth in this specification shall become a part of
the contractor's overall inspection system or quality program. The absence of any
inspection requirements in the specification shall not relieve the contractor of the
responsibility of ensuring that all products or supplies submitted to the Government for
acceptance comply with all requirements of the contract. Sampling inspection, as part
of manufacturing operations, is an acceptable practice to ascertain conformance to
requirements, however, this does not authorize submission of known defective
material, either indicated or actual, nor does it commit the government to accept
defective material.
4.2 Classification of inspections. The inspection requirements specified herein
are classified as follows:
a.
First article inspection (see 4.4).
b.
Quality conformance inspection (see 4.5).
4.3 Inspection conditions. Unless otherwise specified, all inspections shall be
performed in accordance with the test conditions specified in applicable test methods
documents and as specified herein.
4.3.1 Ambient conditions. Unless otherwise specified, all inspections and
tests shall be conducted at room temperature between 20.9 and 31.9º Celsius (C) and at
standard atmospheric pressure.
4.4 First article inspection. When specified in the contract or order (see 6.2), a
first article sample consisting of ten blocks or billets shall be subjected to first article
inspection as specified in table I. Subsequent units shall not be considered for
acceptance until government approval of the first article sample has been obtained (see
3.1 and 4.2).
TABLE I. First article inspection.
Inspection
Requirement paragraph
Test paragraph
Apparent density
3.3.1
4.6.2
Specific resistance
3.3.2
4.6.3
Flexural strength
3.3.3
4.6.4
Ash content
3.3.4
4.6.5
Certification
3.2
4.7
Workmanship
3.4
4.6.1
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business